Skip to content

4 Steps How To Clean Lifestraw Water Filter With Proper Ways

  • by

Can You Clean a LifeStraw?

Yes, you can clean a LifeStraw. How to clean LifeStraw correctly?

First, blow air through it to remove any clog. Next, submerge the filter in safe water and backwash by sucking on the mouthpiece and blowing air into the LifeStraw.

Finally, rinse the LifeStraw by blowing air through it again. For more detailed instructions, consult the user manual or check this article below.

Cleaning a LifeStraw after use

After drinking from a water source using your LifeStraw, it is crucial to clean the straw to remove any bacteria that may be present.

To clean the LifeStraw, blow through the straw to remove any excess water. Once the water stops flowing, unscrew the filter from the straw and blow through the hollow filter to remove any remaining water.

Finally, screw the filter back onto the straw and pack it away for later use.

With proper care, your LifeStraw will give you years of fresh water from ponds, lakes, and streams. Here is the detailed step to clean LifeStraw.

Step 1: Remove Carbon Filter

To remove the carbon filter of your LifeStraw, first, unscrew the cap at the top of the unit. Then, pull out the filter cartridge from the housing.

Finally, twist off the cap at the bottom of the cartridge to release the carbon filter.

Step 2: Submerge The LifeStraw

To use your LifeStraw, submerge the end with the blue cap in water and suck up water through the mouthpiece.

The water will flow through the filter and come out clean!

Step 3: Rinse With Water

After taking a sip of water using your LifeStraw, it is important to rinse it with clean water.

This action will help remove any contaminants clinging to the straw and ensure it is ready for use.

Hold the LifeStraw up to a water source and allow clean water to flow through it for a few seconds.

Step 4: Assemble The Pieces

After you have gathered all the necessary pieces, it is time to assemble your LifeStraw.

First, find a large container holding at least four liters of water. Next, screw the cap onto the bottle filled with water.

Finally, insert the LifeStraw into the mouth of the bottle and drink through it as you would a regular straw.

What does a LifeStraw Not Filter?

A Lifestraw Go does not filter specific contaminants from water, including but not limited to viruses, bacteria, parasites, chemicals, and heavy metals.

Cleaning a LifeStraw for long-term storage

To clean a LifeStraw for long-term storage, remove the filter and submerge it in a teaspoon of bleach diluted in two cups of water for one minute.

Rinse the filter with clean water from a bottle or faucet, then let it dry completely before packing it away in a sealed plastic bag. For best results, replace the activated carbon filter every six months.

How does a Lifestraw filter work?

Lifestraw filters have designed to clean water from any source, making it safe to drink. Insert the straw-like filter into dirty water, and the user sips clean water through the straw.

Campers and hikers can use Lifestraw filters to clean water from streams and lakes.

Lifestraw can also use them to filter water from water bottles and containers. To clean the filter, regularly blow air into it and remove debris.

What Are the Disadvantages of LifeStraw?

How To Clean Lifestraw Water Filter From Bacteria

The LifeStraw is a personal water filter that allows you to drink from any water source. However, there are some disadvantages to using a LifeStraw.

One disadvantage is that it can clog if you try to gulp too much water at once. I know it can be frustrating if you’re trying to drink from a water source that is not very clean.

LifeStraw does not remove chemical contaminants from the water, so it’s essential only to use it with clean drinking water.

Another disadvantage of the LifeStraw is that it is not reusable. Once you have used up all the filtration capacity of this item, you need to buy a new one.

This LifeStraw can be expensive if you are using the straw regularly.

It would help if you only used the LifeStraw for personal use. If you are trying to filter water for a group of people, you must purchase multiple straws. This action can be cost-prohibitive for some groups.

How Many Times Can You Use a LifeStraw?

How Many Times Can You Use a LifeStraw

The lifestraw® product is a water filter used to drink from almost any water source. It has a hollow-fiber membrane that filters out 99.9999% of waterborne bacteria and 99.9% of protozoa.

This straw can use to drink from ponds, streams, lakes, and even dirty puddles. The Lifestraw can filter up to 4,000 liters of water per replacement.

Can LifeStraw filter urine?

No, LifeStraw cannot filter urine. The filtration system removes bacteria, parasites, and viruses from water, making it safe to drink.

Cleaning a clogged LifeStraw

If you find that your LifeStraw is becoming clogged, you can take a few steps to clean it and extend its lifespan.

First, check to see if the clog comes because of debris from the water source. If so, remove it from your mouth and rinse it with dirtless water. If the clog is due to improper cleaning, follow the proper cleaning procedure (see below).

If the clog persists, it may be due to filter membranes becoming damaged or dirty. In this case, you will need to lubricate the filter membranes and backwash the LifeStraw.

Finally, if you are not using the filter regularly, follow the long-term storage procedures to prevent damage (see below).

Cleaning Procedure:

1. Rinse the straw in clean water.

2. Remove any debris that may be blocking the flow of water.

3. Rinse again and repeat until the water flows freely through the straw.

4. If used for long-term storage, dry completely before storing.